New CROSSFIRE-2 available now !
Model with protection covers for fuselage, wing and tail !Ready installed linkage and horns for V-tail!
Ready installed tow-hook! 2.4-friendly fuselage, wings and tail with Giga-Flaps.
Ballast(1 kg),cables,connectors,quicklinks, servo box covers, RDS-system, servoframes for s3150, servoboard fuselage, carbonjoiner.
Optionen:
*F3B-Version
*F3F-Version
*Building service
Also available: servos, receiver, batteries...
Based on the experience from our successful Crossfire eVo and world Championship winning Crossfire F3B we proudly present the new CROSSFIRE-2.
Further experience came from our previous designs such as TOOL (Stratair) and TARGET (airsport products).
New feature on Aer-O-Tec gliders is a slip-off nose cone - proven details such as 2-piece wing and v-tail or carbon joiner and ballast-system were still evident on this new high performance F3B-competition glider.
We use a one-piece vacuum laminated fuselage to get maximum strength and low weight.
The new airfoil ( 7,9 -7,55 thickness !! ) is optimized for best distance performance and high speed runs. Thermal performance and good handling will be achieved from a long tail boom and sufficant v-tail area.
F3B versions come with complete hardware package( small parts, ballast, wing bags...) and RDS -prepration . Wing are double carbon up to aileron servo box and single carbon for wing tips. Fuselage comes with ready installed v-tail linkage and tow-hook with 2.4 ready nose and carbon tail boom.
Slim fuselage (34mm x 49mm)- but 2.4 WEATRONIC receiver will fit perfectly ! We offer also selected RC-systems and servos for our models - please ask for offer...
Satori F3J : successful competition start
Robi Braune and his caller Dominik Prestele after another successful flight in Arbois/FRA. Robi went into the Fly-Offs after a impressive performance ( prelims: place 3 ) with his new SATORI ( maiden flight the day before)!
In the Fly-Off he ended in place 6 overall!
NEW high-performance F3J-glider SATORI
Our new F3J-competition glider has shown a lot of its potential during the last weeks !
Flight tests : Successful flights in windy conditions show Satoris alround performance !
very good handling and stall characteristics , easy to thermal even in windy
conditions, large speed spectrum, and very good glide angle against wind.
new high performance airfoil with very good response on camber changing.
Pre-installed tow-hook, pre-installed cables and connectors, pre-installed horns for aileron and flaps.
Ball-bearing for elevator joiner.
Carbon 68g or 80g version and spread-tow carbon available. Sleek Cross-tail fuselage. 2.4 firendly.
Satori letters on center paneel in carbon design. Comes with protection bags for wing and elevator, servo frames for s3150 and small part package.
Available colours:
Crossfire eVo F3B/F3F
CROSSFIRE eVo ( F3B : single carbon )
TECHNICAL DATA :
| span: | 3100 mm |
| wingarea: | 59,58 dm² |
| avar. chord: | 192,2 mm |
| aspect ratio: | 16,13 |
| weight: | ca. 2050 g |
| v-tail area: | 5,70 dm² |
| length: | 1490 mm |
| wing airfoil: | M1783 |
| stab airfoil: | Sym M8% |
This is the latest version of our successful F3B-WC-winning competition glider Crossfire :
New full carbon fuselage with longer tail boom and v-tail angle of 102 degrees.
new flap and aileron geometry with additional giga-flaps.
wing prepared for rds-systems ( available optional )we deliver also several servo frames...!
new design of carbon canopy for better handling when holding the model in front of wing.
available in standard f3b lay-up ( 80g carbon ) or double carbon ( 80g +68g carbon layers or 68&68 carbon for ultimate f3b performance )
all the proven features of CROSSFIRE combined with the latest experience from f3b-competition !
